Identification required. - Page 4

Martin F · 21st September 2009, 08:51 AM

I'm impressed !

How did you decide on the cut out arrow? Have you seen a pic somewhere?

Gambit · 21st September 2009, 09:20 AM

Glad you like it.

I took the arrow direction from the one on the other side.

It appears to be a guide on how the card fits, i.e. (point arrow towards front).

So that's what I did.
I could of put the round hole more in the corner, keeping with the style but you'd end up hooking the jack handle with your finger.

Kev.O · 21st September 2009, 09:41 PM

And I thought I had OCD

Looks very good Gambit.

Gambit · 22nd September 2009, 04:30 PM

Quote:

Originally Posted by Kev.O

And I thought I had OCD

Looks very good Gambit.

I line up pens on my desk Kev....

Gambit · 4th October 2009, 12:42 PM

Right then I'm resurrecting this post as I'm still chasing the boot carpet.

In my car I have the one on the picture below with the blue/purple writing.
Sunny (post 22) has the one with the pink writing. From looking at Sunny's picture of his carpet and the pictures I posted in this thread of the 2 carpets I have, I'd say Sunny has the harsher texture like the one I have from the na.

We both have the same production date, going from the picture below. May 93 to August 98 but different texture.

Question 1. In the description below what does AET and LB stand for?
Question 2. If I wanted the same as I have (blue/purple writing), but without the sub hole. Would I be right in thinking I need 58570-14370-C0

Martin F · 4th October 2009, 04:34 PM

Quote:

Originally Posted by Gambit

Question 1. In the description below what does AET and LB stand for?

AET - Aerotop
LB - Liftback

Gambit · 5th October 2009, 08:46 AM

Quote:

Originally Posted by Martin F

AET - Aerotop
LB - Liftback

Is there a difference?

Martin F · 5th October 2009, 07:02 PM

Yeah, one's all floppy and rattles, the others stiff and handles like a sports car

But in relation to your question i'm not sure there is. The only thing I could think of would be the fact that you store the targa top in the hatch area, but I don't think that has any effect on the carpet.

Gambit · 5th October 2009, 07:18 PM

Quote:

Originally Posted by Martin F

Yeah, one's all floppy and rattles, the others stiff and handles like a sports car

But in relation to your question i'm not sure there is. The only thing I could think of would be the fact that you store the targa top in the hatch area, but I don't think that has any effect on the carpet.

Oh your so mean.
One of these days I'll take you out in it............. I'll have to drug you first so you wont notice it rattling of course.

the mounts for the roof don't interact with the carpet at all so I can't think of a reason either.

Kev.O · 5th October 2009, 09:16 PM

Quote:

Originally Posted by Martin F

Yeah, one's all floppy and rattles, the others stiff and handles like a sports car

But in relation to your question i'm not sure there is. The only thing I could think of would be the fact that you store the targa top in the hatch area, but I don't think that has any effect on the carpet.

That was the only thing I could think of, then I realised that Gambit has an aerotop, so checked his earlier pictures. I'm still none the wiser.

21st September 2009, 08:51 AM	#31
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	I'm impressed ! How did you decide on the cut out arrow? Have you seen a pic somewhere? __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

21st September 2009, 09:20 AM	#32
Gambit Old Timer Jap Spec GZ - Auto Aerotop (TT) Join Date: Jul 2004 Location: Worcester Posts: 2,089	Glad you like it. I took the arrow direction from the one on the other side. It appears to be a guide on how the card fits, i.e. (point arrow towards front). So that's what I did. I could of put the round hole more in the corner, keeping with the style but you'd end up hooking the jack handle with your finger. __________________ J-Spec Twin Turbo Aerotop 3G Brakes Blitz nur spec r Full Stainless DC Blitz Active Front Spoiler Controler Greddy Boost + EXT Gauges Running 1bar OZ Superleggera UK Spec Bonnet Scoop UK Glass Headlamps Mines ECU

21st September 2009, 09:41 PM	#33
Kev.O Officially NOT in Wales! UK Spec - Manual Join Date: Oct 2005 Location: Bristol Posts: 4,130	And I thought I had OCD Looks very good Gambit. __________________ Kev To be single is to be skint

4th October 2009, 12:42 PM	#35
Gambit Old Timer Jap Spec GZ - Auto Aerotop (TT) Join Date: Jul 2004 Location: Worcester Posts: 2,089	Right then I'm resurrecting this post as I'm still chasing the boot carpet. In my car I have the one on the picture below with the blue/purple writing. Sunny (post 22) has the one with the pink writing. From looking at Sunny's picture of his carpet and the pictures I posted in this thread of the 2 carpets I have, I'd say Sunny has the harsher texture like the one I have from the na. We both have the same production date, going from the picture below. May 93 to August 98 but different texture. Question 1. In the description below what does AET and LB stand for? Question 2. If I wanted the same as I have (blue/purple writing), but without the sub hole. Would I be right in thinking I need 58570-14370-C0 __________________ J-Spec Twin Turbo Aerotop 3G Brakes Blitz nur spec r Full Stainless DC Blitz Active Front Spoiler Controler Greddy Boost + EXT Gauges Running 1bar OZ Superleggera UK Spec Bonnet Scoop UK Glass Headlamps Mines ECU

5th October 2009, 07:02 PM	#38
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	Yeah, one's all floppy and rattles, the others stiff and handles like a sports car But in relation to your question i'm not sure there is. The only thing I could think of would be the fact that you store the targa top in the hatch area, but I don't think that has any effect on the carpet. __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)