|
Non-Supra Tech Corner Technical discussions NOT specifically related to the MKIV Supra |
|
Thread Tools | Display Modes |
7th May 2008, 10:04 AM | #1 |
Member
None - Don't currently own a MKIV Supra. Join Date: Jul 2007
Location: Glasgow
Posts: 63
|
Racing harness
hi guyz, is it possible to install a racing harness safely while keeping the back seats in place and still alow small people to sit in the back:P?
|
7th May 2008, 06:16 PM | #2 |
Old Timer
None - Don't currently own a MKIV Supra. Join Date: Jan 2005
Location: west mids
Posts: 4,196
|
I doubt it, the side straps that go over your lap wouldnt be a problem but the shoulder straps would need to go towards the boot. Its also a pain in the arse wearing them, i had Willans race harness's in my R/R and got fed up putting them on an off.
__________________
dunk |
7th May 2008, 06:31 PM | #3 |
Member
None - Don't currently own a MKIV Supra. Join Date: Jul 2007
Location: Glasgow
Posts: 63
|
yeah just think they look nice, would prob be a pain after a while.
|
7th May 2008, 06:47 PM | #4 |
Old Timer
None - Don't currently own a MKIV Supra. Join Date: Jan 2005
Location: west mids
Posts: 4,196
|
Trust me it is a pain, keep em for the track, look a little boyracerish in a rd car imo. Unless its stripped out and caged up then its a no from me
__________________
dunk |
6th April 2009, 12:33 PM | #5 |
Senior Member
Single Turbo - Manual Join Date: Apr 2007
Location: oxfordshire
Posts: 786
|
dunk sorry to rake this back up but i spoke to whifbitz (paul) about a four point luke harness and he said the tunnel would need drilling and a plate bolting through from the tunnel as there was no fixing tunnelside in a supra for a harness,how does anyone else mount them wasnt doubting paul i just didnt want to be drilling holes
__________________
[I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp |
6th April 2009, 05:38 PM | #6 |
Beer and more Beer
|
I had a loop bolt where the frame bolts to the floor and the harnesses clipped into the loops.
|
6th April 2009, 05:55 PM | #7 |
Junior Member
Jap Spec SZ - 5 sp Manual (NA) Join Date: Jan 2009
Location: suffolk
Posts: 9
|
|
6th April 2009, 06:04 PM | #8 |
Beer and more Beer
|
They were on the car when i bought it.
I will have a look around for you though |
6th April 2009, 06:05 PM | #9 |
Junior Member
Jap Spec SZ - 5 sp Manual (NA) Join Date: Jan 2009
Location: suffolk
Posts: 9
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|