Fcd

MarkLee77 · 24th January 2010, 09:33 PM

Hi
Just a quick question what setting should HKS FCD be set at for 1.2 bar?

Martin F · 25th January 2010, 08:21 PM

Can't find much info on this (not even in the HKS instructions) apart from setting 12 would allow the pressure signal to pass straight through and 1 is the highest setting.

So I reckon you will have to try a few settings and keep an eye on your boost gauge.

MarkLee77 · 25th January 2010, 10:12 PM

Thanks Martin so would I be correct in thinking that set to 1 it would allow maximum boost and 12 would be standard fuel cut as if the device has not been installed?

Martin F · 25th January 2010, 10:31 PM

Yep, as best I can tell.

MarkLee77 · 27th January 2010, 07:50 PM

Big thanks Martin is it cool to put my drift car project on here? picked her up today!

Martin F · 27th January 2010, 09:16 PM

Yeah go for it.

Probably best in Off-Topic

MarkLee77 · 28th January 2010, 02:05 PM

ok will post some info up soon

24th January 2010, 09:33 PM	#1
MarkLee77 Member None - Don't currently own a MKIV Supra. Join Date: Jul 2005 Posts: 184	Fcd Hi Just a quick question what setting should HKS FCD be set at for 1.2 bar?

25th January 2010, 08:21 PM	#2
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	Can't find much info on this (not even in the HKS instructions) apart from setting 12 would allow the pressure signal to pass straight through and 1 is the highest setting. So I reckon you will have to try a few settings and keep an eye on your boost gauge. __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

25th January 2010, 10:31 PM	#4
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	Yep, as best I can tell. __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

27th January 2010, 09:16 PM	#6
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	Yeah go for it. Probably best in Off-Topic __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

25th January 2010, 10:12 PM	#3
MarkLee77 Member None - Don't currently own a MKIV Supra. Join Date: Jul 2005 Posts: 184	Thanks Martin so would I be correct in thinking that set to 1 it would allow maximum boost and 12 would be standard fuel cut as if the device has not been installed?

27th January 2010, 07:50 PM	#5
MarkLee77 Member None - Don't currently own a MKIV Supra. Join Date: Jul 2005 Posts: 184	Big thanks Martin is it cool to put my drift car project on here? picked her up today!

28th January 2010, 02:05 PM	#7
MarkLee77 Member None - Don't currently own a MKIV Supra. Join Date: Jul 2005 Posts: 184	ok will post some info up soon

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)