|
Non-Supra Tech Corner Technical discussions NOT specifically related to the MKIV Supra |
|
Thread Tools | Display Modes |
12th February 2008, 09:00 PM | #1 |
Member
Jap Spec RZ-S - Auto Join Date: Sep 2006
Location: Gloucester
Posts: 100
|
How to wire in my defi Boost gauge.
A call for help to anyone who has wired in a defi boost gauge with the link control.
I want to know where the best place to wire to is. In particular I am struggling to find what wire(colour) to use for the illumination wire. Was hoping to use the cig lighter wire but not sure which one it is. Can anyone help out here. Thanks Carl |
12th February 2008, 09:12 PM | #2 |
Administrator
|
As long as you know which colour wire it is on your Defi link control unit, and assuming you are fitting it to a MKIV, why not just follow one of the boost gauge installs in the 'How to....'' section.
__________________
Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources |
12th February 2008, 09:31 PM | #3 |
Member
Jap Spec RZ-S - Auto Join Date: Sep 2006
Location: Gloucester
Posts: 100
|
I must have been typing in the wrong things. Kept trying anything with defi in but had to be less specific. Found the 'How to' guide on wiring in the boost gauge to the clock. That will help a treat.
Cheers for gentle pointing in right direction.... |
12th February 2008, 11:53 PM | #4 |
Officially NOT in Wales!
UK Spec - Manual Join Date: Oct 2005
Location: Bristol
Posts: 4,130
|
I used the power from the clock, as it have all four wires that are required
Try this: Red (perminant +) = Red Black (perminant -)= White/Black Orange (ignition) = Blue/Red White (illumination)= Green/Orange
__________________
Kev To be single is to be skint |
13th February 2008, 08:53 AM | #5 |
stella monster
|
once again the "a" team solves the problem. lol
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|