Turbo Exhaust On A NA?

Williams_NA · 21st December 2009, 01:06 PM

Hi guys,

After contacting Japspeed about the exhaust they sell they have told me that it is made for the turbo.

However will this still fit onto an NA?

Cheers.

Gambit · 21st December 2009, 05:24 PM

Not sure I think the n/a exhaust is narrower, so I don't know if the bolt holes will line up....

Right then an update judging by the fact that Blitz do a nur spec R for TT and one for n/a I'd say no, otherwise it would be one size fits all.

Martin F · 21st December 2009, 11:06 PM

If it's a CAT back exhaust it should fit.

However (as Gambits indicated above) NA exhausts are usually designed a little different to TT ones, generally a bit narrower piping to keep the velocity of the exhaust gases up.

stuart w · 10th March 2010, 11:27 AM

wont fit mate the n/a exhaust pipe is alot thiner than the turbo by about 10mm you could get a reducing pipe made from the tubro to the n/a dont think it would cost that much to get it done.

Martin F · 10th March 2010, 08:49 PM

Quote:

Originally Posted by stuart w

wont fit mate the n/a exhaust pipe is alot thiner than the turbo by about 10mm

At what point is it thinner?

I know of people who have fitted TT exhausts to NA's so I was under the impression, that although the pipework may have differences, the flanges don't.

stuart w · 11th March 2010, 01:53 PM

apologies i was under the impression that the flanges and exhaust pipe were bigger.

pjavon · 13th March 2010, 06:02 AM

I've got an Apexi TT exhaust on my N/A. fitted o.k just the last bracket by the tail pipe needed altering slightly for some reason

21st December 2009, 01:06 PM	#1
Williams_NA Junior Member Jap Spec RZ-S - Manual Join Date: Sep 2009 Location: Birmingham Posts: 24	Turbo Exhaust On A NA? Hi guys, After contacting Japspeed about the exhaust they sell they have told me that it is made for the turbo. However will this still fit onto an NA? Cheers.

21st December 2009, 05:24 PM	#2
Gambit Old Timer Jap Spec GZ - Auto Aerotop (TT) Join Date: Jul 2004 Location: Worcester Posts: 2,089	Not sure I think the n/a exhaust is narrower, so I don't know if the bolt holes will line up.... Right then an update judging by the fact that Blitz do a nur spec R for TT and one for n/a I'd say no, otherwise it would be one size fits all. __________________ J-Spec Twin Turbo Aerotop 3G Brakes Blitz nur spec r Full Stainless DC Blitz Active Front Spoiler Controler Greddy Boost + EXT Gauges Running 1bar OZ Superleggera UK Spec Bonnet Scoop UK Glass Headlamps Mines ECU Last edited by Gambit; 21st December 2009 at 05:41 PM.

21st December 2009, 11:06 PM	#3
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	If it's a CAT back exhaust it should fit. However (as Gambits indicated above) NA exhausts are usually designed a little different to TT ones, generally a bit narrower piping to keep the velocity of the exhaust gases up. __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

10th March 2010, 11:27 AM	#4
stuart w Junior Member Jap Spec SZ - 5 sp Manual (NA) Join Date: Mar 2010 Location: armadale Posts: 14	wont fit mate the n/a exhaust pipe is alot thiner than the turbo by about 10mm you could get a reducing pipe made from the tubro to the n/a dont think it would cost that much to get it done. __________________ WHEN IN DOUBT HANG IT OUT.

11th March 2010, 01:53 PM	#6
stuart w Junior Member Jap Spec SZ - 5 sp Manual (NA) Join Date: Mar 2010 Location: armadale Posts: 14	apologies i was under the impression that the flanges and exhaust pipe were bigger. __________________ WHEN IN DOUBT HANG IT OUT.

13th March 2010, 06:02 AM	#7
pjavon TT on the list Jap Spec SZ - 5 sp Manual (NA) Join Date: May 2009 Location: Wales Posts: 29	I've got an Apexi TT exhaust on my N/A. fitted o.k just the last bracket by the tail pipe needed altering slightly for some reason

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)