|
Performance Electronics ECU's, FCD's, Piggy Backs, Boost Controllers and all those other performance related gizzmos |
|
Thread Tools | Display Modes |
24th January 2010, 09:33 PM | #1 |
Member
None - Don't currently own a MKIV Supra. Join Date: Jul 2005
Posts: 184
|
Fcd
Hi
Just a quick question what setting should HKS FCD be set at for 1.2 bar? |
25th January 2010, 08:21 PM | #2 |
Administrator
|
Can't find much info on this (not even in the HKS instructions) apart from setting 12 would allow the pressure signal to pass straight through and 1 is the highest setting.
So I reckon you will have to try a few settings and keep an eye on your boost gauge.
__________________
Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources |
25th January 2010, 10:12 PM | #3 |
Member
None - Don't currently own a MKIV Supra. Join Date: Jul 2005
Posts: 184
|
Thanks Martin so would I be correct in thinking that set to 1 it would allow maximum boost and 12 would be standard fuel cut as if the device has not been installed?
|
25th January 2010, 10:31 PM | #4 |
Administrator
|
Yep, as best I can tell.
__________________
Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources |
27th January 2010, 07:50 PM | #5 |
Member
None - Don't currently own a MKIV Supra. Join Date: Jul 2005
Posts: 184
|
Big thanks Martin is it cool to put my drift car project on here? picked her up today!
|
27th January 2010, 09:16 PM | #6 |
Administrator
|
Yeah go for it.
Probably best in Off-Topic
__________________
Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources |
28th January 2010, 02:05 PM | #7 |
Member
None - Don't currently own a MKIV Supra. Join Date: Jul 2005
Posts: 184
|
ok will post some info up soon
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|