3rd October 2008, 08:06 PM | #21 |
Senior Member
Single Turbo - Manual Join Date: Apr 2007
Location: oxfordshire
Posts: 786
|
just a quick photo update of the last week or so's work on the TT i have been busy cutting the bonnaet out for the uk spec scoop to be fitted ,i decided to use the seal as well i know many didnt but it looks as much oem as possible!,the cutting went realy well and instead of cutting at right angles i used a broaching tool and cut radded lines then joined them up with a dremel,
__________________
[I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp |
3rd October 2008, 08:15 PM | #22 |
Senior Member
Single Turbo - Manual Join Date: Apr 2007
Location: oxfordshire
Posts: 786
|
My painter kevin at alladin motorsport had the bits dropped off saturday morning at 11am, he didnt work sunday and yet the parts were back to me at 10.30 am monday morning! all for 60 pounds!very impressed i have the taken delivery for my tsd dsc from thor and have this to fit ,and some brushed stainless heater face bezels then have to fit the heater and dash dimmer buttons,i had these made by a small machine shop in bedford ,these will be anodised red soon ....
__________________
[I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp Last edited by jay200bhp; 3rd October 2008 at 08:26 PM. |
3rd October 2008, 08:20 PM | #23 |
Senior Member
Single Turbo - Manual Join Date: Apr 2007
Location: oxfordshire
Posts: 786
|
Heres the car after i had fitted the scoop etc!
__________________
[I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp Last edited by jay200bhp; 3rd October 2008 at 08:27 PM. |
4th October 2008, 11:36 AM | #24 |
Administrator
|
Looks good Kev, and nice to see a professional job.
That seal is not OEM i'm afraid, the foam seal can only be seen by looking closely normally. Looks like you have some sort of seal sitting proud of the side of the scoop.
__________________
Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources |
4th October 2008, 11:51 AM | #25 |
Senior Member
Single Turbo - Manual Join Date: Apr 2007
Location: oxfordshire
Posts: 786
|
hmmm steve manley sold me the seal as part of the kit i needed for the scoop!?
__________________
[I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp |
5th October 2008, 09:21 AM | #26 |
Old Timer
None - Don't currently own a MKIV Supra. Join Date: Jan 2005
Location: west mids
Posts: 4,196
|
Looks the same as mine and all bought through Toyota
__________________
dunk |
5th October 2008, 11:34 AM | #27 |
Old Timer
Jap Spec GZ - Auto Aerotop (TT) Join Date: Jul 2004
Location: Worcester
Posts: 2,089
|
It is a stock item.
you've got the seal on backwards it should lip up the inside not the outside! |
5th October 2008, 03:12 PM | #28 |
Officially NOT in Wales!
UK Spec - Manual Join Date: Oct 2005
Location: Bristol
Posts: 4,130
|
Looking nice, just need to sort the seal out. I think it really finishes off the bonnet.
__________________
Kev To be single is to be skint |
5th October 2008, 07:26 PM | #29 |
Senior Member
Single Turbo - Manual Join Date: Apr 2007
Location: oxfordshire
Posts: 786
|
guys the seal has a right angle and the sticky part is stuck to the bottom of my scoop on the face which mates to the bonnet the smaller part of the seal lips up the side of the scoop at the moment ???
__________________
[I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp |
5th October 2008, 08:01 PM | #30 |
Administrator
|
These may help:
http://www.mkiv.com/techarticles/eur...all/index.html http://www.mkiv.com/techarticles/eur...rts/index.html
__________________
Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|