12th June 2008, 09:21 PM | #411 |
Officially NOT in Wales!
UK Spec - Manual Join Date: Oct 2005
Location: Bristol
Posts: 4,130
|
Thank you for the kind words Andy. We'll have to meet up and i'll take you for a ride once the engine i ran in and mapped
__________________
Kev To be single is to be skint |
12th June 2008, 10:14 PM | #412 |
Junior Member
None - Don't currently own a MKIV Supra. Join Date: Jun 2008
Location: Salisbury
Posts: 2
|
|
15th June 2008, 02:05 AM | #413 |
Member
Single Turbo - Auto Join Date: Aug 2007
Location: US Kentucky
Posts: 114
|
That is the best looking thing I have ever seen. I know you have alot of time and money in that project. Very nice car.
|
15th June 2008, 02:54 PM | #414 |
Officially NOT in Wales!
UK Spec - Manual Join Date: Oct 2005
Location: Bristol
Posts: 4,130
|
Thank you for the kind words
__________________
Kev To be single is to be skint |
25th July 2008, 09:46 PM | #415 |
Member
Single Turbo - Auto Join Date: Aug 2007
Location: US Kentucky
Posts: 114
|
Kev on you wastegate where does the vaccum port on the bottom of the wastegate go. Does it get caped off or does it run back to a vaccum sorce. I know that the top port hooks into the boost controller then to the pressure port on the turbo, but the book I have for my boost controller does not shoe where the port on the bottom of the wastegate goes.
Thanks. |
25th July 2008, 10:13 PM | #416 | |
Officially NOT in Wales!
UK Spec - Manual Join Date: Oct 2005
Location: Bristol
Posts: 4,130
|
Quote:
__________________
Kev To be single is to be skint |
|
26th July 2008, 02:49 AM | #417 |
Member
Single Turbo - Auto Join Date: Aug 2007
Location: US Kentucky
Posts: 114
|
Thanks. Do you have anything on the fuel pump for the wiring at the pump. I ran two pump in the tank and I am going to run another power and relay for the other pump but I need to know which wire at the pigtail is power. I think one is blue and the other is tan/black strip. I know there are five wires but the other three are constant power and the other two are for the sending unit-fuel gauge.
Last edited by jat4372; 26th July 2008 at 02:51 AM. |
26th July 2008, 09:17 PM | #418 |
Officially NOT in Wales!
UK Spec - Manual Join Date: Oct 2005
Location: Bristol
Posts: 4,130
|
I'm ony running a single Walbro pump so I'm afraid I don't have any info. Have you looked on www.mkiv.com ?
__________________
Kev To be single is to be skint |
27th July 2008, 02:16 AM | #419 |
Member
Single Turbo - Auto Join Date: Aug 2007
Location: US Kentucky
Posts: 114
|
yes and could not find it. But its after I get everything hooked up and ready to start I can find out which wire is hot when I crank the engine over. By the way I bought a single kit like yours. T 67, aem standalone, DLI, 4 Inch exhaust all the way out, 3 inch intercooler pipeing all the way around. But the kit I got came with 1000cc injectors and I am wondering if that is going to be way to my fuel, or can I adjust it out ok. Also got number 8 fuel line.
But my kit is not polished so it does not look as good as yours. Also if it would be any help to you I have a titian motorsport tune for my aem, if it could help. |
27th July 2008, 08:29 PM | #420 | |
Officially NOT in Wales!
UK Spec - Manual Join Date: Oct 2005
Location: Bristol
Posts: 4,130
|
Quote:
Thanks for the offer of the map but I'm hoping to get the guy who sorted out my base map back once I finally get time to run my engine in.
__________________
Kev To be single is to be skint |
|
Currently Active Users Viewing This Thread: 21 (0 members and 21 guests) | |
|
|