Removing for polishing!!!

ADZsupra1 · 30th July 2010, 08:29 AM

Morning Guys

3 months on from purchasing Micheal cannys supra, 2k extra spent than i wanted to and still more to go..im now thinking of stripping the engine down and polishing it all up whilst im saving for valve stem seals to be done

Is it an easy job to remove the whole throttle body, and intake, turbo pipework?? (note i dont want to remove the turbos just all the metal pipework on the top....

any advice tips warnings...appreciated!!

Adz

Martin F · 30th July 2010, 06:16 PM

It's not that hard to remove the pipework if you take your time and are logical and mark up any bits that you are unsure of.

Also there are lots of people around that have done it before and can give advice if you get stuck

30th July 2010, 08:29 AM	#1
ADZsupra1 Junior Member UK Spec - Auto Join Date: Dec 2009 Location: Warwickshire Posts: 47	Removing for polishing!!! Morning Guys 3 months on from purchasing Micheal cannys supra, 2k extra spent than i wanted to and still more to go..im now thinking of stripping the engine down and polishing it all up whilst im saving for valve stem seals to be done Is it an easy job to remove the whole throttle body, and intake, turbo pipework?? (note i dont want to remove the turbos just all the metal pipework on the top.... any advice tips warnings...appreciated!! Adz

30th July 2010, 06:16 PM	#2
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	It's not that hard to remove the pipework if you take your time and are logical and mark up any bits that you are unsure of. Also there are lots of people around that have done it before and can give advice if you get stuck __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)