wheel hub

supra67 · 15th June 2013, 10:24 AM

hi. is there anyone out there who knows were i can get a new rear hub for my supra? apparently theyre rarer than rocking horse crap in the UK

Martin F · 15th June 2013, 04:37 PM

Hi & welcome.

Which part of the hub are you after, the whole assembly or just one part?

Toyota generally have most parts available still.

supra67 · 15th June 2013, 04:52 PM

Just the hub not the whole assembly
Wheel bearings gone & worn abut an inch down on inside.
Il try toyota cheers, just thought someone in this country
Would do a patern part.
I could weld it & then get it turned down.

Martin F · 15th June 2013, 05:56 PM

Pattern parts are few and far between on these cars because of the low numbers.

However a good option would be to find a good condition second hand one as there are usually plenty around.

As your in Hertfordshire i'd give Paul Whiffin a call (www.whifbitz.co.uk) and see if he has one sitting around. He's only in Enfield.

supra67 · 15th June 2013, 06:56 PM

I forgot alk about whifbitz cheers for that.
I can get it trade from toyota in stortford £176 inc vat
Not to bad for genuine

supra67 · 15th June 2013, 07:13 PM

Ive had the car over 10 yrs & this is first time ive had to spend out
So not to bad

Martin F · 15th June 2013, 11:11 PM

Certainly can't complain if that's the first major expense in 10years.

15th June 2013, 10:24 AM	#1
supra67 Junior Member Jap Spec RZ - Auto (TT) Join Date: Jun 2013 Location: hertfordshire Posts: 4	wheel hub hi. is there anyone out there who knows were i can get a new rear hub for my supra? apparently theyre rarer than rocking horse crap in the UK

15th June 2013, 04:37 PM	#2
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	Hi & welcome. Which part of the hub are you after, the whole assembly or just one part? Toyota generally have most parts available still. __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

15th June 2013, 05:56 PM	#4
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	Pattern parts are few and far between on these cars because of the low numbers. However a good option would be to find a good condition second hand one as there are usually plenty around. As your in Hertfordshire i'd give Paul Whiffin a call (www.whifbitz.co.uk) and see if he has one sitting around. He's only in Enfield. __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

15th June 2013, 11:11 PM	#7
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	Certainly can't complain if that's the first major expense in 10years. __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

15th June 2013, 04:52 PM	#3
supra67 Junior Member Jap Spec RZ - Auto (TT) Join Date: Jun 2013 Location: hertfordshire Posts: 4	Just the hub not the whole assembly Wheel bearings gone & worn abut an inch down on inside. Il try toyota cheers, just thought someone in this country Would do a patern part. I could weld it & then get it turned down.

15th June 2013, 06:56 PM	#5
supra67 Junior Member Jap Spec RZ - Auto (TT) Join Date: Jun 2013 Location: hertfordshire Posts: 4	I forgot alk about whifbitz cheers for that. I can get it trade from toyota in stortford £176 inc vat Not to bad for genuine

15th June 2013, 07:13 PM	#6
supra67 Junior Member Jap Spec RZ - Auto (TT) Join Date: Jun 2013 Location: hertfordshire Posts: 4	Ive had the car over 10 yrs & this is first time ive had to spend out So not to bad

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)