MSOC Forums

Go Back   MSOC Forums > Technical > Chassis
Register FAQ Community Calendar

Chassis Drive train, Brakes, Steering and anything else chassis wise

Reply
 
Thread Tools Display Modes
Old 15th April 2009, 09:09 PM   #1
suprapower
Junior Member
 
suprapower's Avatar
 
Jap Spec RZ-S - Manual
Join Date: May 2007
Location: surrey
Posts: 23
Default Genuine Toyota Lower Arm Bushes

After a lot of looking around i found them Genuine Toyota Lower Arm Bushes with part numbers.
I had a o/s/f/r lower arm bolt seized into so decided to remove the front subframe and overhaul it.
I started off loking at poly bushes but wasn't really happy with the things i heard about them and then came across a web site for soarer replacement bushes vfbushes and then soarerworld which lead me to a guy on there who fits lower arm bushes for he's club but he couldn't comfirm that they would fit a supra then cheaptoyota parts contacted me my offered me a front lower arm rear bush £45 but wouldn't give me the part number. I then checked on super pro web cat and the same bush that they fit to the supra also fits soarer '95 with a 2jz engine and a lexus is300? i think, so called toyota they don't list any bushes. looked on toyodiy couldn't find any numbers so looked round some more and came across japarts on ebay selling toyota lower arm bushes for a soarer
looking at the arms they look the same and seeing how super pro list the same bush to fit both they must fit right?, i then went on japarts web site http://www.japarts.co.uk/shop/index....hicle_iid=1556 and found they stock genuine toyota bushes??????? but covered up the numbers, so i got some measured and they are the same size.
My only concern about fitting these bushes is seeing how many soarers go through bushes and i don't really know how it will feel on the road. But they can only be better then replacing with poly one's.

I must also say that my car is a '95 RZ-S import so the lower arm 2nd bush is 54ish mm as there is two sizes.

front lower arm front bush 48654-24040
front lower arm rear bush 48655-24050
they are listed for the soarer

They are a bit of a pig to get out but are easy to press back in.
Attached Images
File Type: jpg DSC00249.jpg (83.0 KB, 11 views)
File Type: jpg DSC00252.jpg (82.5 KB, 8 views)
File Type: jpg DSC00253.jpg (87.7 KB, 8 views)
File Type: jpg DSC00247.jpg (86.9 KB, 8 views)
__________________
ATA Master Tech!
suprapower is offline   Reply With Quote
Old 15th April 2009, 09:17 PM   #2
suprapower
Junior Member
 
suprapower's Avatar
 
Jap Spec RZ-S - Manual
Join Date: May 2007
Location: surrey
Posts: 23
Default

pic's of fitting the bushes.
Attached Images
File Type: jpg DSC00263.jpg (84.0 KB, 7 views)
File Type: jpg DSC00254.jpg (86.5 KB, 4 views)
File Type: jpg DSC00258.jpg (82.8 KB, 6 views)
File Type: jpg DSC00255.jpg (89.5 KB, 5 views)
File Type: jpg DSC00264.jpg (84.7 KB, 8 views)
__________________
ATA Master Tech!
suprapower is offline   Reply With Quote
Old 15th April 2009, 09:17 PM   #3
Kev.O
Officially NOT in Wales!
 
Kev.O's Avatar
 
UK Spec - Manual
Join Date: Oct 2005
Location: Bristol
Posts: 4,130
Default

Will be interested to see how you get on with these. Thank for posting the part numbers, very kind of you after spending so long searching for them
__________________
Kev
To be single is to be skint
Kev.O is offline   Reply With Quote
Old 15th April 2009, 09:19 PM   #4
suprapower
Junior Member
 
suprapower's Avatar
 
Jap Spec RZ-S - Manual
Join Date: May 2007
Location: surrey
Posts: 23
Default

i'm taking the car to norfolk this week so it'll be a good test. will report back!
__________________
ATA Master Tech!
suprapower is offline   Reply With Quote
Old 15th April 2009, 09:26 PM   #5
Martin F
Administrator
 
Martin F's Avatar
 
UK Spec - Manual
Join Date: Aug 2003
Location: Essex, UK
Posts: 10,226
Send a message via MSN to Martin F
Default

That is a good find.

I know the Soarer (IS300 in America) shares some parts with the MKIV Supra, and IIRC some of the arms are interchangeable. Is that price of £45 a bush roughly what a local Toyota dealer would supply those bushes for?
__________________
Martin

UK6TT + Bits & Bobs

'Remember folks, the inside lane isn't just for Xmas'




MSOC FAQ MSOC Members Discounts MSOC Resources
Martin F is offline   Reply With Quote
Old 15th April 2009, 09:36 PM   #6
suprapower
Junior Member
 
suprapower's Avatar
 
Jap Spec RZ-S - Manual
Join Date: May 2007
Location: surrey
Posts: 23
Default

Quote:
Originally Posted by Martin F View Post
That is a good find.

I know the Soarer (IS300 in America) shares some parts with the MKIV Supra, and IIRC some of the arms are interchangeable. Is that price of £45 a bush roughly what a local Toyota dealer would supply those bushes for?
the £45 is what cheaptoyota parts gave me for one bush, i called toyota they said about £40 i think trade to me but japarts do them for about £25 a bush i brought a set as thats how they list them on there web site but with the the part numbers i can't see why we wouldn't be able to order them indivually.
__________________
ATA Master Tech!
suprapower is offline   Reply With Quote
Old 16th April 2009, 08:53 AM   #7
dunk shaw
Old Timer
 
dunk shaw's Avatar
 
None - Don't currently own a MKIV Supra.
Join Date: Jan 2005
Location: west mids
Posts: 4,196
Default

Hope your test drive is a good one, i've recently changed mine but wasnt convinced polybushes were the way to go so splashed out on new arms.
__________________
dunk
dunk shaw is offline   Reply With Quote
Old 17th April 2009, 07:54 PM   #8
suprapower
Junior Member
 
suprapower's Avatar
 
Jap Spec RZ-S - Manual
Join Date: May 2007
Location: surrey
Posts: 23
Default

well i made it here in one piece! didn't feel no different from the original ones, handles fine, just got to make it back now and do the alignment.
__________________
ATA Master Tech!
suprapower is offline   Reply With Quote
Old 22nd April 2009, 04:20 PM   #9
suprapower
Junior Member
 
suprapower's Avatar
 
Jap Spec RZ-S - Manual
Join Date: May 2007
Location: surrey
Posts: 23
Default

and made it back handling feels as it did before just like standard now just need to do the alignment to see if the results are the with spec.
__________________
ATA Master Tech!

Last edited by suprapower; 22nd April 2009 at 04:38 PM.
suprapower is offline   Reply With Quote
Old 22nd April 2009, 06:29 PM   #10
Martin F
Administrator
 
Martin F's Avatar
 
UK Spec - Manual
Join Date: Aug 2003
Location: Essex, UK
Posts: 10,226
Send a message via MSN to Martin F
Default

Good stuff, let us know how the alignment goes.
__________________
Martin

UK6TT + Bits & Bobs

'Remember folks, the inside lane isn't just for Xmas'




MSOC FAQ MSOC Members Discounts MSOC Resources
Martin F is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:53 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2003 - 2017, MSOC