Took my N/A to the rollers

Dann · 5th March 2009, 09:32 PM

Well I finally decided to take my n/a supra to the rollers after a year of modifactions here is the spec list and results. did all the work myself on this car.

MKIV supra N/A Manual

HKS Hi power exhaust
De-cat
Stainless manifold + decat
Skyline gtr33 o2 sensors
Ported polished head
re-seated valves
Ported polished lower plenum
Ported polished upper plenum
Ported polished all induction pipe and throttle body
Arc Induction kit
Braided hoses
8.5mm magna core leads
iridium hks plugs
new distributor and rotor arm
Oil catch tank
Hot wired fuel pump
Exeedy clutch
cusco 1.5 lock lsd
Do-luck radiator hoses
k-sport suspension
drift spec hand brake
rev counter shift light
loads of autogauge dials
19" alloys
275/45/19 rear
245/40/19 front
esprit wide arch body kit
apr racing carbon canards
apr racing carbon rear wing
Plus huge sound install and much much more

Pic of her engine bay

Pic on rollers yes the front bumper was touching lol

the vid of her on rollers the fan they used was well loud.

http://www.youtube.com/watch?v=rtMuK12x_SA

will post print off tomos when I scan it in, its awesome @ 4700rpm she kicks in again like vvti but I dont have it lol.

233.6 bhp @ the rear wheels so assuming 16 % drivetrain loss this puts her at 270.9 bhp @ flywheel. I am so happy with this.

Next to come is map2ecu, and 440 or 550 injectors.

hope you all like

Dann

Martin F · 5th March 2009, 09:45 PM

Congratulations on your result !

Kev.O · 5th March 2009, 09:54 PM

Well done. Will you ever go down the NA-T route?

Dann · 5th March 2009, 09:58 PM

thanks for the replys guys.

No am going to see how far I can take a n/a engine, on the other owners club they said when I started a topic on there that its impossable to get passed 225@fly so am happy have got this far. Once this engine blows I am either going for a 3.4ltr kit or a ls1 v8 but again staying n/a. I have my skyline and gto for turbo fun lol

Gambit · 5th March 2009, 10:17 PM

Good result!

Martin F · 5th March 2009, 10:35 PM

Quote:

Originally Posted by Dann

on the other owners club they said when I started a topic on there that its impossable to get passed 225@fly

Errrr, they come with nearly that from the factory!

dunk shaw · 6th March 2009, 07:54 AM

Keep up the good work

baz · 6th March 2009, 08:00 AM

nice looking car fella, and good results

j80leo · 6th March 2009, 09:42 AM

Not a bad result at all Dann 270 @ flywheel, what was the Torque bud

Dann · 6th March 2009, 03:48 PM

torque is 209.2lbft did expect a bit more torque to be honest but feels good to drive no lag just pure grunt lol.

how do I upload a bmp image my scanner has done it to bmp, and image shack not do it.

5th March 2009, 09:32 PM	#1
Dann Junior Member Jap Spec SZ - 5 sp Manual (NA) Join Date: Nov 2008 Location: Radcliffe Posts: 21	Took my N/A to the rollers Well I finally decided to take my n/a supra to the rollers after a year of modifactions here is the spec list and results. did all the work myself on this car. MKIV supra N/A Manual HKS Hi power exhaust De-cat Stainless manifold + decat Skyline gtr33 o2 sensors Ported polished head re-seated valves Ported polished lower plenum Ported polished upper plenum Ported polished all induction pipe and throttle body Arc Induction kit Braided hoses 8.5mm magna core leads iridium hks plugs new distributor and rotor arm Oil catch tank Hot wired fuel pump Exeedy clutch cusco 1.5 lock lsd Do-luck radiator hoses k-sport suspension drift spec hand brake rev counter shift light loads of autogauge dials 19" alloys 275/45/19 rear 245/40/19 front esprit wide arch body kit apr racing carbon canards apr racing carbon rear wing Plus huge sound install and much much more Pic of her engine bay Pic on rollers yes the front bumper was touching lol the vid of her on rollers the fan they used was well loud. http://www.youtube.com/watch?v=rtMuK12x_SA will post print off tomos when I scan it in, its awesome @ 4700rpm she kicks in again like vvti but I dont have it lol. 233.6 bhp @ the rear wheels so assuming 16 % drivetrain loss this puts her at 270.9 bhp @ flywheel. I am so happy with this. Next to come is map2ecu, and 440 or 550 injectors. hope you all like Dann

5th March 2009, 09:45 PM	#2
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	Congratulations on your result ! __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

5th March 2009, 09:54 PM	#3
Kev.O Officially NOT in Wales! UK Spec - Manual Join Date: Oct 2005 Location: Bristol Posts: 4,130	Well done. Will you ever go down the NA-T route? __________________ Kev To be single is to be skint

5th March 2009, 10:17 PM	#5
Gambit Old Timer Jap Spec GZ - Auto Aerotop (TT) Join Date: Jul 2004 Location: Worcester Posts: 2,089	Good result! __________________ J-Spec Twin Turbo Aerotop 3G Brakes Blitz nur spec r Full Stainless DC Blitz Active Front Spoiler Controler Greddy Boost + EXT Gauges Running 1bar OZ Superleggera UK Spec Bonnet Scoop UK Glass Headlamps Mines ECU

6th March 2009, 07:54 AM	#7
dunk shaw Old Timer None - Don't currently own a MKIV Supra. Join Date: Jan 2005 Location: west mids Posts: 4,196	Keep up the good work __________________ dunk

5th March 2009, 09:58 PM	#4
Dann Junior Member Jap Spec SZ - 5 sp Manual (NA) Join Date: Nov 2008 Location: Radcliffe Posts: 21	thanks for the replys guys. No am going to see how far I can take a n/a engine, on the other owners club they said when I started a topic on there that its impossable to get passed 225@fly so am happy have got this far. Once this engine blows I am either going for a 3.4ltr kit or a ls1 v8 but again staying n/a. I have my skyline and gto for turbo fun lol

6th March 2009, 08:00 AM	#8
baz stella monster None - Don't currently own a MKIV Supra. Join Date: Jul 2004 Location: wales Posts: 2,058	nice looking car fella, and good results __________________

6th March 2009, 09:42 AM	#9
j80leo GT4088r Jap Spec RZ - Auto (TT) Join Date: Aug 2005 Location: staffordshire Posts: 1,291	Not a bad result at all Dann 270 @ flywheel, what was the Torque bud

6th March 2009, 03:48 PM	#10
Dann Junior Member Jap Spec SZ - 5 sp Manual (NA) Join Date: Nov 2008 Location: Radcliffe Posts: 21	torque is 209.2lbft did expect a bit more torque to be honest but feels good to drive no lag just pure grunt lol. how do I upload a bmp image my scanner has done it to bmp, and image shack not do it. Last edited by Dann; 6th March 2009 at 03:50 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)