|
Non-Supra Tech Corner Technical discussions NOT specifically related to the MKIV Supra |
|
Thread Tools | Display Modes |
20th April 2009, 06:39 PM | #31 |
Senior Member
Single Turbo - Manual Join Date: Apr 2007
Location: oxfordshire
Posts: 786
|
i agree great pictures jay ! thank you
does the sest go back on the drivers and the passengers side after fitting the eyebolt as im 6ft 3 and have the seat with about 1 inch to the back bench when driving. ill check out the 7/16's tap size and have a look at what thread the eyebolts come with ! and where did the floor brace come from looks good! thanks for all the help again!
__________________
[I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp |
20th April 2009, 06:56 PM | #32 |
Junior Member
Single Turbo - Manual Join Date: Mar 2009
Location: Durham
Posts: 33
|
Cheers Kev, I got them from Motoscope (in Northallerton, where I get work done on the car).
PS I saw dunk mentioned about the bolt on the tunnel, he is right, my drivers seat will hit this, but as I am a short arse it isn't an issue, funnily enough the passenger one cleared it so it could go all the way back (this was with the Recaro Millenium seats). |
20th April 2009, 06:58 PM | #33 | |
Junior Member
Single Turbo - Manual Join Date: Mar 2009
Location: Durham
Posts: 33
|
Quote:
Got the floor brace from Nic on .netty, it's a Do-Luck Rear Cross Bar |
|
20th April 2009, 07:08 PM | #34 |
Senior Member
Single Turbo - Manual Join Date: Apr 2007
Location: oxfordshire
Posts: 786
|
was it expensive? if you dont mind me asking? hmmm ill have to have a good look at the eyebolt and find a comprimise i think !il wait for it to get here and spend a saturday swearing at it! thanks mate
__________________
[I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp |
20th April 2009, 07:15 PM | #35 |
Junior Member
Single Turbo - Manual Join Date: Mar 2009
Location: Durham
Posts: 33
|
It was £253 bud. I was also advised not to use that bar to secure the shoulder harnesses if that helps.
The annoying thing about the seat is that I reckon it's only catching a couple of mill, if the seat was 5 mill across it would sail past |
20th April 2009, 08:05 PM | #36 |
Senior Member
Single Turbo - Manual Join Date: Apr 2007
Location: oxfordshire
Posts: 786
|
hmm i wonder if i could look underneath and then file a mm or two off of the eyebolt where it catches the seat?
just ordered an assortment of eyebolts to from driftworks so i can try a few out ?
__________________
[I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp |
20th April 2009, 08:41 PM | #37 |
Junior Member
Single Turbo - Manual Join Date: Mar 2009
Location: Durham
Posts: 33
|
Off the record, if I were going to file anywhere it wouldn't be the eyebolt, I'd be happier removing a slice of the seat runner, it only catches on the outer slider housing, it may make more sense when you see it in situ
|
29th April 2009, 11:01 PM | #38 |
Member
None - Don't currently own a MKIV Supra. Join Date: Jul 2007
Location: Glasgow
Posts: 63
|
had a talk about this on www. supraforums .com as i was looking at the do-luck bar as a point to hold a harness but they all agreed : what we are saying is, You can do it, but will be a 99% chance it will compact your spine in case of an accident leaving you possible paralyzed because the harness is pulling down instead of back
__________________
Last edited by shug2k7; 29th April 2009 at 11:07 PM. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|