Thor DSC-TSD Wiring diagram for facelift??

Beefyblx · 14th January 2009, 08:23 PM

Hello all, Has anyone fitted a thor speedo converter and delimiter for a facelift?? All i can find on the website is http://thor-racing.co.uk/files/supra_facelift_dsc.jpg

Ive e-mailed them but they haven't got any wire diagrams for the faclift??

HELP

Martin F · 14th January 2009, 09:13 PM

Most of the information seems to be in that picture that you have linked to. However I suspect you may have an extra wire for the speed limiter part which needs to go back to the ECU.

Could you confirm that is what you're after?

I just looked and I have an ECU diagram for a TT facelift car, but don't seem to have one for an NA to hand.

Beefyblx · 15th January 2009, 06:00 PM

Quote:

Originally Posted by Martin F

Most of the information seems to be in that picture that you have linked to. However I suspect you may have an extra wire for the speed limiter part which needs to go back to the ECU.

Could you confirm that is what you're after?

I just looked and I have an ECU diagram for a TT facelift car, but don't seem to have one for an NA to hand.

Yeah it was what i was after its the only thing it doesn't show, i got some written instructions but again it doesn't say about the ecu.......

Quote:

The cruise and top speed delimiter sections are relevant for both, but not the odometer and speedometer.

The red and blue wire is the speed signal - this is cut - the connector side connects to the White wire (5:8) from DSC and the loomside connects to the Green wire from the DSC.

The Yellow wire (12V Ignition) is spliced and you connect the red (DSC 12V Ignition)

The Pink wire needs to be cut, leaving the connecter end not connect (cover it off as in diagram) The loomside is connected to the Blue wire 1:1 output (from DSC)

The Black wire 0v goes to the chasis

I was hoping for more of a diagram like they have for the pre facelift, It makes it easier when me and my mate get down to doing it

Cheers for your help

Martin F · 16th January 2009, 10:34 PM

I've managed to find some 2JZ-GE VVTi wiring diagrams (Japanese) but it looks like there may be two speed sensor signals. However I need to look again when I have a bit more time.

One thing that you could help with if you get chance is to take a look at your ecu, as it seems from the diagrams that I have that it has many seperate plugs connecting to it. Could you confirm and if possible take a pic and post up.

Beefyblx · 17th January 2009, 11:21 AM

I'm hopfully starting to take the dash out today so i'll take some pictures of the ecu while i'm doing it. Cheers for your help

jay200bhp · 18th January 2009, 07:55 PM

hello fella i done mine recently and it was a bit tricky to figure out from the thor diagram supplied buuut on there websit there was a schematic for a facelift vvti ill try and find it! james

jay200bhp · 18th January 2009, 08:06 PM

http://homepage.ntlworld.com/peter.b...ind_speedo.jpg

jay200bhp · 18th January 2009, 08:07 PM

http://homepage.ntlworld.com/peter.b...speedo_mph.jpg

this is the one i used!

jay200bhp · 18th January 2009, 08:10 PM

http://homepage.ntlworld.com/peter.b...ips/speedo.htm

jay200bhp · 18th January 2009, 08:22 PM

http://homepage.ntlworld.com/peter.b...ps/speedo1.gif

14th January 2009, 08:23 PM	#1
Beefyblx Love the RSP Jap Spec SZ-R - 6 sp Manual (NA) Join Date: Jan 2009 Location: Rugeley Posts: 33	Thor DSC-TSD Wiring diagram for facelift?? Hello all, Has anyone fitted a thor speedo converter and delimiter for a facelift?? All i can find on the website is http://thor-racing.co.uk/files/supra_facelift_dsc.jpg Ive e-mailed them but they haven't got any wire diagrams for the faclift?? HELP __________________ 96 Facelift RSP SZ-R

14th January 2009, 09:13 PM	#2
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	Most of the information seems to be in that picture that you have linked to. However I suspect you may have an extra wire for the speed limiter part which needs to go back to the ECU. Could you confirm that is what you're after? I just looked and I have an ECU diagram for a TT facelift car, but don't seem to have one for an NA to hand. __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

16th January 2009, 10:34 PM	#4
Martin F Administrator UK Spec - Manual Join Date: Aug 2003 Location: Essex, UK Posts: 10,226	I've managed to find some 2JZ-GE VVTi wiring diagrams (Japanese) but it looks like there may be two speed sensor signals. However I need to look again when I have a bit more time. One thing that you could help with if you get chance is to take a look at your ecu, as it seems from the diagrams that I have that it has many seperate plugs connecting to it. Could you confirm and if possible take a pic and post up. __________________ Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources

17th January 2009, 11:21 AM	#5
Beefyblx Love the RSP Jap Spec SZ-R - 6 sp Manual (NA) Join Date: Jan 2009 Location: Rugeley Posts: 33	I'm hopfully starting to take the dash out today so i'll take some pictures of the ecu while i'm doing it. Cheers for your help __________________ 96 Facelift RSP SZ-R

18th January 2009, 07:55 PM	#6
jay200bhp Senior Member Single Turbo - Manual Join Date: Apr 2007 Location: oxfordshire Posts: 786	thor dsc-tsd hello fella i done mine recently and it was a bit tricky to figure out from the thor diagram supplied buuut on there websit there was a schematic for a facelift vvti ill try and find it! james __________________ [I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp

18th January 2009, 08:06 PM	#7
jay200bhp Senior Member Single Turbo - Manual Join Date: Apr 2007 Location: oxfordshire Posts: 786	http://homepage.ntlworld.com/peter.b...ind_speedo.jpg __________________ [I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp

18th January 2009, 08:07 PM	#8
jay200bhp Senior Member Single Turbo - Manual Join Date: Apr 2007 Location: oxfordshire Posts: 786	http://homepage.ntlworld.com/peter.b...speedo_mph.jpg this is the one i used! __________________ [I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp

18th January 2009, 08:10 PM	#9
jay200bhp Senior Member Single Turbo - Manual Join Date: Apr 2007 Location: oxfordshire Posts: 786	http://homepage.ntlworld.com/peter.b...ips/speedo.htm __________________ [I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp

18th January 2009, 08:22 PM	#10
jay200bhp Senior Member Single Turbo - Manual Join Date: Apr 2007 Location: oxfordshire Posts: 786	http://homepage.ntlworld.com/peter.b...ps/speedo1.gif __________________ [I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)